News

Archive for levelling – Page 2

E&P: Levelling with touchscreen

The newly revised hydraulic levelling system for motorhomes from E&P Hydraulics is now called Level M and offers users even more comfort. In the past the motorhome steady legs were controlled at the touch of a button; in future, this will be achieved simply and conveniently using a tablet and/or smartphone app, both of which have the same user interface. One advantage of the new, modern operating concept is that it can be updated in terms of user interface and functions. The small touchpad is provided with a fixed charging station in the motorhome. When the tablet is removed from this unit it functions as a practical, wireless radio remote control from which the entire levelling system can also be controlled from outside the vehicle. Simply touching the tablet or smartphone screen commands the system to automatically level the vehicle horizontally. The hydraulic cylinders can also be moved manually so that, for example, a motorcycle carrier can be loaded more easily.

Motorhome levelling system

The principle of the E&P hydraulic levelling system is quite simple. The legs are extended hydraulically out of a cylinder at the push of a button and position the vehicle perfectly horizontally within 120 seconds. But behind the simple functionality, there is a lot of experience and complex technology.

The hydraulic support system includes steady legs, pump blocks, oil reservoirs, hydraulic lines and electronic control. At a press of the button on the remote control, the pump starts and pumps oil from the tank into the cylinders of the steady legs. The steady legs of the E&P system extend in pairs until they contact the ground and a counter-pressure is built up in the system. Thanks to the electronic spirit level integrated into the control unit, the system starts to extend the legs further until the vehicle is horizontal. To ensure that no damaging forces act on the superstructure, the legs are always extended in pairs on the longitudinal or transverse axis and always with just the amount of travel necessary. Depending on the model, when fitted to a motorhome the hydraulic system can move up to 10,000 kilograms per leg. That is sufficient to level a 22-tonne vehicle.

Each E&P system is matched to the weight of the vehicle. The electronics control the travel of the legs via the pressure in the respective cylinder. This means that the system does not need any susceptible electrical sensors on the legs. All systems are fastened to the chassis supporting points using adapters specially designed for the respective vehicle and body type, which means that no welding is necessary.

An overview of the E&P Level M levelling system:

• For motorhomes from 3.5 to 22 tonnes permitted gross weight
• Available with different stroke lengths
• Drive-off protection – the system functions only when the ignition is switched off
• Hydraulic pump is driven by a powerful motor (12 V / 24 V – 800 W)
• Fully automatic levelling at the push of a button
• Semi-automatic operation of pairs of supports
• Emergency operation in case of power failure
• Lowering of the supports in pairs to avoid stresses being exerted on the chassis or body
• Permanent protection against corrosion, stone chips, moisture and dirt
• Stainless steel base plate as standard
• Can be integrated into an existing air suspension system
• Level and steady in maximum of two minutes
• Easy touchscreen operation
• Compact and light
• Maintenance-free
• Cable and line routing protected from dirt and moisture

The software can also be retrofitted to enable control using a smartphone app (iOS and Android). This requires a WiFi module that is integrated into the control cable between the control unit and touch panel or conventional operating panel and is supplied with power to operate the levelling system by pushing a button. Power off is automatic after five minutes of inactivity.

For further information on the E&P Hydraulics Level M motorhome levelling system, CLICK HERE.

The benefits of E&P levelling systems

We often hear about the difficulties of levelling a caravan on a slightly sloping pitch and then lining up the wheels to fit an axle wheel lock, particularly on a twin axle caravan van. Levelling the ‘van can often be a two-person operation and sometimes very stressful for all involved. You’ve taken ages to get your caravan level and then you can’t get to the receiver for your lock lozenges!

If you’re lucky enough to afford a new Lunar Alaria or Buccaneer caravan, like the Galera, then you won’t have these problems…Welcome to the E&P automatic levelling system!

How does it work?

At the press of a button, the E&P Levelsystem allows you to tilt and lift up the caravan with its six hydraulic supports. You can then turn the wheels by hand and get those axle wheel locks fitted with ease. Using a control panel inside the caravan or remote control, you then press auto to activate the levelling system and watch it automatically put down the hydraulic steadies and level the caravan in less than two minutes.

E&P automatics caravan levelling system

This automatic levelling system can be retro-fitted and although it’s not cheap, it’s simple to use and will get you perfectly pitched in no time at all – without the need for jacks, blocks and spirit levels.

Using hydraulic axle supports (or jacks) the system lifts and tilts your caravan, taking the weight of your tourer and reducing the stress on the caravan suspension, corner steadies and tyres. When in storage you can also take the pressure off the tyres completely and use the jacks to take the stresses out of the axle.

The system also includes four hydraulic corner supports with AL-KO Big Foot feet to help spread the load and make your caravan floor feel as solid as concrete!

Automatic levelling

The levelling process is completely automatic and having the ability to tilt the caravan from side to side also makes it possible to repair a puncture at the side of the road whilst still attached to the tow car.

The system is also a good theft deterrent as there’s no way of lifting up the corner steadies or the jockey wheel, and with the axle jacks down any caravan would take some moving!

For more information visit: Caravanguard or find the best system for your needs here.

E&P Hydraulics Levelling System now fitted to all new Buccaneer caravans

Rosmia can announce that all  new Buccaneer models are now fitted with the automatic levelling system by E&P Hydraulics. Operated from a control panel next to the entrance door, the system uses modified corner steadies and a pair of axle jacks to level the van in two minutes, so there’s no need for a steady winder or cordless electric drill.  Once level, all connections are easy to access.

e-and-p-jacks-remoteRosmia is the southeast accredited dealer and service centre for the E&P Hydraulics Levelling System. Headed by Managing Director Ryan Walker, Rosmia offers a full service to Elddis customers buying a new Buccaneer caravan. This includes servicing the system, resolving any faults both within and outside of the guarantee period and answering any questions from Elddis customers and the Elddis sales and service team.  Rosmia engineers can also retro fit the system to existing caravans at their extensive centre in Haywards Heath, West Sussex.

Rosmia Managing Director Ryan Walker said: “We have been installing the E&P Hydraulics LevelSystem to motorhomes and caravans for over 4 years and so I am delighted that Elddis, a nationally renowned brand has decided to have it fitted to all new Buccaneer caravans. We are now making Elddis dealerships aware not only of our servicing capability as an E&P accredited service centre, but also of the opportunity they have to showcase the benefits of the system to existing customers that will benefit from it. Retro fitting the system is straightforward and requires little, if any modification of a customer’s caravan.”